Industrial endoscope with two lenses, a 5-meter probe and a 4.5" color LCD display for detailed examination of hard-to-reach places with the ability to record video and photos to the internal memory.
Camera head with a diameter of 8 mm. One central lens and one/two on the sides. Full HD resolution 1920x1080 pixels. Cameras are switched using a button.
Focal length of main camera A 3-10 cm;
Focal length of side camera B 1.5-3 cm;
Moisture protection of the camera and display according to IP67 standard.
The 5-meter long probe is rigid, but at the same time flexible. Retains the shape it was given by hand.
Camera head with 6 LED backlight and adjustable brightness.
Downloading of saved material is carried out using a cable to a computer, or via a microSD memory card.
The set includes attachments - a hook and a magnet for removing objects from hidden and inaccessible cavities.
Also included is a bracket that screws into the back of the display so that you can install it vertically and not hold it in your hands.
Built-in 2500mAh battery. For charging, use the USB Type-C cable included in the kit.
For charging, it is prohibited to use fast chargers from modern phones and tablets that exceed the parameters 5V and 1.5A in order to avoid damage to the camera. Acceptable parameters are usually found in the USB outputs of computers, televisions or chargers of old phones.
The display has a built-in microphone and speaker. The microphone can be used to record comments during inspection and defect detection and subsequent transmission to the client, for example, in a car service when inspecting the internal parts of the engine. The speaker is used to view saved material.
Photos are stored in JPG format, video in AVI format.
